深层地埋管换热器换热性能模拟及稳定性研究

以深层地源热泵地埋管换热器为研究对象,对其换热特性进行数值模拟和实验研究。建立考虑轴向地温梯度的深层地埋管换热器传热模型并进行模拟计算,通过示范工程现场测试数据验证该模型的正确性。对深层地埋管换热器换热的性能稳定性进行研究,发现深层地埋管换热器连续长期运行及间歇长期运行下换热性能基本稳定。当按不同运停比运行时,岩土温度恢复效果良好。研究结果表明深层地源热泵有较好的换热性能及运行稳定性,为深层地热能的开发利用提供了新思路。     

Switching controller design for linear time invariant plant with a single I/O delay

ABSTRACT

To deal with the problem of conflicting requirements that cannot be satisfied by only a single LTI controller, this paper focuses on the design of a switching controller, which includes several stabilising linear time-invariant (LTI) controllers designed independently with different control performance criteria, for a specific LTI plant with a single I/O delay. The switching controller design procedure is divided into three steps. First, using simple loop shifting arguments, the design problem is reducible to an equivalent delay-free one. Second, traditional LTI controller synthesis methods could be considered independently for the delay-free plant. Third, based on a quadratically stable state space realisation method, a Youla parameter including a switching strategy with these controllers is designed to guarantee different requirements. Finally, a numerical example is provided to demonstrate the validity and efficiency of the approach.     

Metabonomics analysis of nonvolatile small molecules of beers during forced ageing

Three kinds of beers with different degrees of ageing were used to examine their nonvolatile small molecules by a metabonomics approach based on ultra performance liquid chromatography coupled with quadrupole time‐of‐flight tandem mass spectrometry (UPLC‐Q‐ToF‐MS/MS). Results showed that a total of 2114 compounds were detected in forced‐aged beers with the positive mode of UPLC‐Q‐ToF‐MS/MS. There was a clear separation among three groups of beers with different degrees of ageing in principal component analysis (PCA) model. Sixteen potential metabolite markers related to beer oxidative stability were identified by orthogonal partial least‐squares discriminate analysis (OPLS‐DA). Results from the changes in the spectrum also indicated that some new compounds formed in beer during forced ageing. Thus, the proposed metabonomics approach is a powerful tool to give a fully understanding the ageing process of beer based on the identification of the markers related to oxidative stability.     

Effects of red beet extracts on protein and lipid oxidation,colour, microbial,sensory properties and storage stability of Turkish pastırma

Lipid oxidation and discoloration are two important problems in the storage of pastırma, a meat product. In this research, the usability of lyophilized red beet water extract (LRBWE) in cemen paste and its effects on the pastırma quality (especially colour, protein and lipid oxidation, microbial and sensory properties) were investigated during storage. Two trials were conducted; in trial 1, LRBWE was obtained, its various properties were designated and effects on the cemen paste of these extracts (0.0%, 0.4%, 0.6%, 0.8% 1.0% and 1.2%) were determined. In trial 2, pastırma with cemen paste containing 0.8%, 1.0% and 1.2% LRBWE were produced and stored at 4 ± 1 °C for 150 days. The LRBWE did not influence protein oxidation of pastırma, whereas increasing LRBWE level led to a decrease in lipid oxidation (P < 0.01), and an increase in redness (a1) value (P < 0.01) and sensory properties (P < 0.01) of sliced pastırma compared with control pastırma. These results revealed that the addition of 1.0% or 1.2% LRBWE to cemen paste was effective to improve the colour stability, lipid oxidation, microbial and sensory quality of pastırma during storage.     

Impact of A134 and E218 Amino Acid Residues of Tropomyosin on Its Flexibility and Function

Tropomyosin (Tpm) is one of the major actin-binding proteins that play a crucial role in the regulation of muscle contraction. The flexibility of the Tpm molecule is believed to be vital for its functioning, although its role and significance are under discussion. We choose two sites of the Tpm molecule that presumably have high flexibility and stabilized them with the A134L or E218L substitutions. Applying differential scanning calorimetry (DSC), molecular dynamics (MD), co-sedimentation, trypsin digestion, and in vitro motility assay, we characterized the properties of Tpm molecules with these substitutions. The A134L mutation prevented proteolysis of Tpm molecule by trypsin, and both substitutions increased the thermal stability of Tpm and its bending stiffness estimated from MD simulation. None of these mutations affected the primary binding of Tpm to F-actin; still, both of them increased the thermal stability of the actin-Tpm complex and maximal sliding velocity of regulated thin filaments in vitro at a saturating Ca²⁺ concentration. However, the mutations differently affected the Ca²⁺ sensitivity of the sliding velocity and pulling force produced by myosin heads. The data suggest that both regions of instability are essential for correct regulation and fine-tuning of Ca²⁺-dependent interaction of myosin heads with F-actin.     

Self-Assembly of Proteinaceous Shells around Positively Charged Gold Nanomaterials Enhances Colloidal Stability in High-Ionic-Strength Buffers

The enzyme lumazine synthase (LS) has been engineered to self-assemble into hollow-shell structures that encapsulate unnatural cargo proteins through complementary electrostatic interactions. Herein, we show that a negatively supercharged LS variant can also form organic–inorganic hybrids with gold nanomaterials. Simple mixing of LS pentamers with positively charged gold nanocrystals in aqueous buffer spontaneously affords protein-shelled gold cores. The procedure works well with differently sized and shaped gold nanocrystals, and the resulting shelled complexes exhibit dramatically enhanced colloidal stability over a wide range of pH (4.0–10.0) and at high ionic strength (up to 1 m NaCl). They are even stable over days upon dilution in buffer. Self-assembly of engineered LS shells in this way offers an easy and attractive alternative to commonly used ligand-exchange methods for stabilizing inorganic nanomaterials.     

垂直水平联合自流排渗在银山矿业尾矿库降渗工程中的应用

为解决江西铜业集团银山矿业尾矿库安全检查中发现的坝体浸润线超高问题，保证坝体稳定性，结合尾矿库现场实际情况，在充分分析不同排渗方式特点的基础上，提出采用垂直水平联合自流排渗方式，并制定了经济合理可行的技术方案。通过浸润线观测数据表明:在落实排渗方案以后，坝体浸润线有明显的下降，坝体局部渗水、沼泽化现象有明显改观，有效地保证了坝体稳定性。     

Agreement and repeatability of four different devices to measure non-invasive tear breakup time (NIBUT)

PurposeSince tear film stability can be affected by fluorescein, the Dry Eye Workshop (DEWSII) recommended non-invasive measurement of tear breakup time (NIBUT). The aim of this study was to investigate the agreement and repeatability of four different instruments in the measurement of NIBUT.Methods72 participants (mean 24.2 ± 3.6 years) were recruited for this multi-centre, cross-sectional study. NIBUT was measured three times from one eye using each of the instruments in randomized order on two separate sessions during a day, separated by at least 2 h. NIBUT was performed at three sites (Switzerland, Germany and UK) using three subjective instruments, Tearscope Plus (Keeler, Windsor, UK) (TS), Polaris (bon Optic, Lübeck, Germany) (POL), EasyTear Viewplus (Easytear, Rovereto, Italy) (ET) and the objective Keratograph 5 M (Oculus Optikgeräte GmbH, Wetzlar, Germany) (KER). As the latter instrument only analyses for 24 s, all data was capped at this value.ResultsNIBUT measurements (average of both sessions) between the four instruments were not statistically significantly different: TS (median 10.4, range 2.0–24.0 s), POL (10.1, 1.0–24.0 s), ET (10.6, 1.0–24.0 s) and KER (11.1, 2.6–24.0 s) (p = 0.949). The objective KER measures were on average (1.2 s ± 9.6 s, 95 % confidence interval) greater than the subjective evaluations of NIBUT with the other instruments (mean difference 0.4 s ± 7.7 s, 95 % confidence interval), resulting in a higher limits of agreement. The slope was -0.08 to 0.11 indicating no bias in the difference between instruments with the magnitude of the NIBUT. Repeated measurements from the two sessions were not significantly different for TS (p = 0.584), POL (p = 0.549), ET (p = 0.701) or KER (p = 0.261).ConclusionsThe four instruments evaluated for their measurement of tear stability were reasonably repeatable and give similar average results.     

Saddle-node equilibrium points on the stability boundary of nonlinear autonomous dynamical systems

A complete characterization of the stability boundary of an asymptotically stable equilibrium point in the presence of type-k saddle-node non-hyperbolic equilibrium points, with k ≥ 0, on the stability boundary is developed in this paper. Under the transversality condition, it is shown that the stability boundary is composed of the stable manifolds of the hyperbolic equilibrium points on the stability boundary, the stable manifolds of type-0 saddle-node equilibrium points on the stability boundary and the stable centre and centre manifolds of the type-r saddle-node equilibrium points with r ≥ 1 on the stability boundary. This characterization is the first step to understanding the behaviour of stability regions and stability boundaries in the occurrence of saddle-node bifurcations on the stability boundary.